Return
to APS Cork Web Site TECH-DATA -
A.P.S. FIBER BOARD DESCRIPTION A.P.S. Fiber
Board is composed of asphalt impregnated fibers that are bonded together
to produce a compressible, resilient, non-extruding concrete expansion
Joint filler. It is readily compressible and will recover to more than
75% of its original thickness. USE A.P.S. Fiber
Board is an ideal expansion Joint in highways, pavements, runways, sidewalks,
and in all concrete or block structures. While offering excellent non-extrusion
and recovery properties, A.P.S. Fiber Board should be protected from water
infiltration and weathering with a suitable joint sealant. APPLICATION A.P.S. Fiber
Board should be installed against the forms or other abutting structures,
as detailed on the plans, before placing concrete. The filler should be
installed 1/2" below the concrete surface and sealed with a high
quality joint sealing compound to protect from water infiltration and
weathering. However, a backer rod or bond breaker tape should be installed
over the joint filler to prevent the sealant from bonding to the filler. SIZE/PACKAGING
PER SKID CONFORMANCE ASTM D1751
A.P.S.
SUPPLY CO. 711 COOPER STREET BEVERLY, NJ 08010
Width
3"
4"
5"
6"
8"
12"
4'
x 10' Sheets
We will replace
any material which proves defective in workmanship within 90 days from date
of purchase. Because we cannot anticipate or control the many different
condidtions under shich this information and our products may be used, we
do not guarantee the applicability or the accuracy of this information or
the suitability of our products in any given situation. Users of our products
should make their own tests to determine the suitability of responsibility
for loss or damage arising from the handling and use of our products. Also,
statements concerning the possible use of our products are not intended
as recommendations to use our products in teh infringement of any patent.
PHONE (609) 877-7900 _ FAX (609)877-6187
HTTP://WWW.APSCORK.COM