Return
to APS Cork Web Site TECH-DATA -
A.P.S. RUBBER EXPANSION JOINT FILLER DESCRIPTION A.P.S.
Rubber Expansion Joint Filler is a highly resilient and flexible bonded
rubber joint filler for concrete produced to a uniform thickness and density.
It is readily compressible with a recovery of 90% or more of the original
thickness and has a density of not less than 30 pounds per cubic foot
as per ASTM D-1752 specifications. Available in gray or black. USE A.P.S.
Rubber Expansion Joint Filler should be used in concrete structures where
resiliency and flexibility is essential as could occur on sewage treatment
plants, power plants, tunnels, airports, and deep foundations. It is recommended
for use with all polymer based joint sealants. APPLICATION A.P.S.
Rubber Expansion Joint Filler should be installed against the forms or
other adjacent abutting structures, as detailed on the plans, before placing
concrete. It can be easily cut to size on the job with a utility knife.
On site cutting enables the contractor to always have on hand the exact
size required, eliminating overbuying of various sizes. PACKAGING APPROXIMATE
WEIGHT 1/4"
- 8.75# per sheet CONFORMANCE ASTM
D-1752, Type 1 PHYSICAL
PROPERTIES LIMITATIONS Immersion
of A.P.S. Rubber Expansion Joint Filler in gasoline, toluene, naptha,
and similar solvents is not recommended. Surface contact with these fluids
may cause swelling and softening.
A.P.S.
SUPPLY CO. 711 COOPER STREET BEVERLY, NJ 08010
Thickness:
Width:
Length
Standard
Sheet Size
3/8" - 13.25# per sheet
1/2" - 17.50# per sheet
3/4" - 26.25# per sheet
1" - 35.00# per sheet
AASHTO M-153, Type 1
Color
Black
or Gray
Compression
Deflection
(PSI) @ 50% Compression50-500
Density
(p.c.f.)
30
minimum
Temperature
Range
low - high (F)+20
to 150
Recovery
90%
minimum
Tensile
Strength (min. p.s.i.)
20
Elongation
(min.)
60%
We will replace
any material which proves defective in workmanship within 90 days from date
of purchase. Because we cannot anticipate or control the many different
condidtions under shich this information and our products may be used, we
do not guarantee the applicability or the accuracy of this information or
the suitability of our products in any given situation. Users of our products
should make their own tests to determine the suitability of responsibility
for loss or damage arising from the handling and use of our products. Also,
statements concerning the possible use of our products are not intended
as recommendations to use our products in teh infringement of any patent.
PHONE (609) 877-7900 _ FAX (609)877-6187
HTTP://WWW.APSCORK.COM