Return
to APS Cork Web Site TECH-DATA -
A.P.S. STANDARD CORK EXPANSION JOINT FILLER DESCRIPTION Cork Expansion
Joint Filler is preformed from clean, granulated cork particles, bonded
together with an insoluble phenolic resin and molded under heat and pressure.
The resultant material is strong, light in weight, flexible, acid-resistant
and waterproof. Cork will not extrude when compressed up to 50 percent
of its original thickness, and regains up to 95 percent as joint expansion
takes place. USE Cork Expansion
Joint Filler is used for all types of concrete construction where the
filler must be compatible with polymer-base sealants. Cork is widely used
in commercial and industrial construction. ADVANTAGES Light in
color. Can be compressed
without extrusion. Recovers
to approximately 95% of original thickness after compression. Compatible
with polymer-base joint sealants. CONFORMANCE ASTM
D1752, Type II Strips
- LF/Carton Below
A.P.S.
SUPPLY CO. 711 COOPER STREET BEVERLY, NJ 08010
AASHTO M153, Type II
SIZES AND PACKAGING
Sheet
Pallet
We will replace
any material which proves defective in workmanship within 90 days from date
of purchase. Because we cannot anticipate or control the many different
condidtions under shich this information and our products may be used, we
do not guarantee the applicability or the accuracy of this information or
the suitability of our products in any given situation. Users of our products
should make their own tests to determine the suitability of responsibility
for loss or damage arising from the handling and use of our products. Also,
statements concerning the possible use of our products are not intended
as recommendations to use our products in teh infringement of any patent.
PHONE (609) 877-7900 _ FAX (609)877-6187
HTTP://WWW.APSCORK.COM