You Searched For:
  • SubCategory=Construction Chemicals
6 Matches Found (displaying 1 to 6)

Product:CERTI-VEX ENVIO STRONG
Category:Chemicals
SubCategory: Construction Chemicals
Manufacturer:Vexcon Chemicals
Description:CERTI-VEX ENVIOSTRONG is a technically advanced non re-emulsifiable modified vinyl emulsion polymer. It is a proprietary formulation designed for use as an additive for Portland cement mixes to improve adhesion and mechanical properties. Cement prepared using the product exhibits fast curing, good resistance to most common industrial chemicals, ultra violet light and high adhesion. Recommended for use as an admisture to Portland cement base mixes and toppings for patching or resurfacing concrete floors, sidewalks, driveways or ramps. Use to repair and fill cement cracks and joints, helping to minimize cracking. Meets federal specifications: GSA for bond adhesive. Please request Bulleting AB102
Catalog page:080

Product:CERTI-VEX ENVIOHARD 204
Category:Chemicals
SubCategory: Construction Chemicals
Manufacturer:Vexcon Chemicals
Description:CERTI-VEX ENVIOHARD 204 is a water white silicate based chemically hardening compound proprietary formulated to provide maximum penetration to minimize dusting. CERTI-VEX ENVIOHARD 204 complies with federal specifications by the US Army Corps of Engineers, Navy, Post Office and Veterans Administration for use on concrete floors as in table 1.1, ACI standard 302.69. Please request Bulletin CT115.
Catalog page:080

Product:CERTI-VEX ENVIOPROTECT
Category:Chemicals
SubCategory: Construction Chemicals
Manufacturer:Vexcon Chemicals
Description:CERTI-VEX ENVIOPROTECT is a scientifically formulated liquid containing flurosilicates and surfactants for deep penetration. Surfaces treated with this product are highly resistant to most acids and chemicals. The insoluble mineral by products are acid resistant with a moh's hardness equal to quarts (6-7). CERTI-VEX ENVIOPROTECT complies with federal specifications CE-204, also liquid chemical hardeners specifications by the US Army Corp of Engineers, Navy, Post Office and Veterans Administration for use on concrete floors as in Table 1.1, ACI standard 302.69. Please request Bulleting CT113.
Catalog page:080

Product:CERTI-VEX LINSEED
Category:Chemicals
SubCategory: Construction Chemicals
Manufacturer:Vexcon Chemicals
Description:CERTI-VEX LINSEED 50% is an advanced formulation of 50% boiled linseed and mineral sprits manufactured with special addtitives to imporve the maximum antispalling concrete protection. when properly applied to cured concrete, CERTI-VEX LINSEED acts as a barrier protecting the concrete from potential damage from freeze/thaw cycles and corrosive salts. The boiled linseed protion of CERTI-VEX LINSEED complies to AASHTO M-233 and ASTM D260 Type I. The solvent portion of CERTI-VEX LINSEED complies with ASTM D235 and AASHTO M126, M128, and M233. CERTI-VEX LINSEED also meets the requirements of federal specifications FSS TT-L-190C and FSS TT-L-291C. Please request Bulletin CT107.
Catalog page:080

Product:CERTI-VEX TRIPLESET NC
Category:Chemicals
SubCategory: Construction Chemicals
Manufacturer:Vexcon Chemicals
Description:CERTI-VEX TRIPLE SET NC is an accelerating admixture for use in concrete, Portland Cement and mortar. Contains no added chloride IONS ensuring that the product does not contribute to the corrosion of reinforcing steel. CERTI-VEX TRIPLESET NC is a ready to use liquid, added to the gauging water allowing for cold weather placement of concrete, Portland cement, mortar and pre-cast members. It decreases critical cold weather setting times, leading to early high and ultimate increased strength and improved wear resistance properties. Meets ASTM C-494 type C and E Admixtuer. Please request Bulletin AB106
AB104
Catalog page:080

Product:CERTI-VEX TRIPLESET
Category:Chemicals
SubCategory: Construction Chemicals
Manufacturer:Vexcon Chemicals
Description:CERTI-VEX TRIPLE SET is an accelerating admixture for use in concrete, Portland Cement and mortar. It is a ready to use liquid, added directly to the gauging water to reduce the water requirements and set times of concrete and mortar mixes. Increases the early high and ultimate strength, imporves workability and improves wear resistance properties. Meets ASTM C-494 Type C Admixture. Please request Bulletin AB104
Catalog page:080