You Searched For:
  • SubCategory=Deck Forming Hangers
12 Matches Found (displaying 1 to 12)

Product:ADJUSTABLE HANGER
Category:Concrete Accessories
SubCategory: Deck Forming Hangers
Manufacturer:Dayton/Richmond
Description:The Adjustable Hanger is available in a 45 or a 90 version. The hanger attaches to a bridge beam stirrup and is designed to support onesided formwork on applications where welding is not permitted.
Catalog page:019

Product:RICHCO ANGLE HANGER
Category:Concrete Accessories
SubCategory: Deck Forming Hangers
Manufacturer:Dayton/Richmond
Description:Richmond Angle Hangers are designed with a 45 degree end clip at one end are are used to support fascia overhang formwork.
Catalog page:019

Product:RICHCO HANGER
Category:Concrete Accessories
SubCategory: Deck Forming Hangers
Manufacturer:Dayton/Richmond
Description:Richmond Richco Hangers permit installation and adjustment from above the deck. Richco Hangers have a nominal setback of 3/8" and are used on interior bridge beams.
Catalog page:019

Product:RICHCO HAUNCH ANGLE HANGER
Category:Concrete Accessories
SubCategory: Deck Forming Hangers
Manufacturer:Dayton/Richmond
Description:Richmond Richco Haunch Angle Hangers has a 45 degree end clip on one end and is used to support fascia overhang formwork.
Catalog page:019

Product:RICHCO HAUNCH HANGER
Category:Concrete Accessories
SubCategory: Deck Forming Hangers
Manufacturer:Dayton/Richmond
Description:Richmond Richco Haunch Hangers are similar to Richco Hangers except the haunch hangers provide for 1" to 1 1/2" haunch conditions.
Catalog page:019

Product:TY-BACK HANGER
Category:Concrete Accessories
SubCategory: Deck Forming Hangers
Manufacturer:Dayton/Richmond
Description:Richmond Ty-Back Hangers are used on stell fascia beams, where welding is not permitted to take thrust out of the fascia overhang bracket without shifting.
Catalog page:019

Product:ADJUSTABLE JOIST HANGER
Category:Concrete Accessories
SubCategory: Deck Forming Hangers
Manufacturer:Dayton/Richmond
Description:Richmond Adjustable Joist Hangers are available in two sizes that accept 2x and 4x joist material. The Adjustable Joist Hanger can be used on concrete beams, steel girders and box culverts. They are adjustable and 100% reuseable.
Catalog page:020

Product:BROACH HANGER
Category:Concrete Accessories
SubCategory: Deck Forming Hangers
Manufacturer:Dayton/Richmond
Description:The Broach Hanger is available in 45 degree or 90 degree versions. The 45 degree hanger supports fascia formwork on one end and interior formwork on the other. The 90 degree hanger supports interior formwork on both ends.
Catalog page:020

Product:FASCIA OVERHANG BRACKET
Category:Concrete Accessories
SubCategory: Deck Forming Hangers
Manufacturer:Dayton/Richmond
Description:Fascia Overhang Brackets support bridge deck facia formwork. Brackets can be mounted to steel or concrete girders using the appropriate hanger device. Standard brackets have a 3,000 lbs. safe working load and the Adjustable bracket is rated at 4,200 lbs. safe working load.
Catalog page:020

Product:FORM BRACE ALIGNER
Category:Concrete Accessories
SubCategory: Deck Forming Hangers
Manufacturer:Dayton/Richmond
Description:Richmond Form Brace Aligners are designed to align and position all types of vertical forms and form tie systems. Combined in the field with any size stud, the Aligner provides easy adjustment for final positioning and alignment. Unit provides 5" of effective adjustment.
Catalog page:020

Product:OFFSET FREE-FIT HANGER
Category:Concrete Accessories
SubCategory: Deck Forming Hangers
Manufacturer:Dayton/Richmond
Description:Richmond Offset Free-Fit Hangers are used for haunch conditions or where a larger than normal overhang condition is encountered.
Catalog page:020

Product:SCAFFOLD BRACKET
Category:Concrete Accessories
SubCategory: Deck Forming Hangers
Manufacturer:Dayton/Richmond
Description:Richmond Scaffold Bracket is used to support the scaffolding on nearly any type of formwork. They can be flush mounted or adjusted to fit 2x4, 2x6 and 2x8 vertical or horizontal wales and/or strongbacks. With a 4:1 safety factor, the bracket has a safe working load of 1,000 pounds.
Catalog page:020