You Searched For:
  • SubCategory=Form Release
2 Matches Found (displaying 1 to 2)

Product:CONSPEC CURING COMPOUNDS
SubCategory: Form Release/Curing Compounds
Manufacturer:Conspec Marketing & Manufacturing Co.
Description:Conspec #21

A multi-use concrete curing compound. USDA accepted, chemically reactive, with a Five Year Dustproofing Guarantee. Enhances the abrasion impact, and chemical resistance of concrete.

Conspec #21 is a water-soluble compound specifically formulated to maintain the natural appearance of concrete. The adhesion of secondary toppings, coating, and final concrete finishes is not affected. It is odorless, non-flammable, non-explosive.

Conspec #21 is formulated for curing and dustproofing freshly cast concrete. Combines with the free lime and other chemicals in the concrete moisture hydration and assures a positive cure.

Applicable Standards: USDA accepted, VOC compliant


Cure & Seal
Cure & Seal is formulated for curing and sealing freshly cast and finished concrete by retaining the hydration water. Cure & Seal penetrates into the concrete and acts as an effective sealer and dustproofer.

Cure & Seal provides a transparent film that is resistant to abrasion and common staingin materials, prevents the adhesion of cementitious droppings and the penetration of most oils and greases.

ASTM C-309, Type I, Class A and B and AASHTO M-148, Type I and/or I-D.


Conspec #1-21%
Conspec #1-21% is a high solids, water clear acrylic copolymer that cures, seals, dustproofs and hardens freshly cast concrete. Contains Jp-64 to assure adhesion and eliminate flaking. A scientific compound that penetrates the concrete and forms a high gloss film that provides maximum protection to slabs against common staining materials. Reduces slab clean-up costs up to 50%.

Conspec #1-21% Solids is formulated for curing and sealing freshly cast and finished concrete by retaining the hydration water. Conspec #1-21% Solids penetrates in the concrete and acts as an effective sealer and dustproofer.

ASTM C-309, Type I, Class A and B and AASHTO M-148, Type I and/or I-D.

RX Cure
A high solids, hydrocarbon, resin based curing compound that controls curing for strong and durable concrete. Formulated as a dissipating type cure.

RX Cure is used to cure freshly poured concrete surfaces; verticla or horizontal, interior or exterior. After dissipation, the concrete is suitable for secondary toppings and coatings.

RX Cure is formulated as a dissipating type resin. Aids in assuring clean and coatable concrete surfaces. the rate of dissipation is dependent upon climatic conditions, complete dissipation can be expected in 28 to 45 days.

Complies with: ASTM C-309, Type I, Class A and B and AASHTO M-148, Type I and/or I-D.


D.O.T. Cure W.W.
A high solids white pigmented was based concrete curing compound. Formulated to retain moisture in freshly poured concrete. The selected white pigments reflect that the heat of the sun, keeping the concrete surface cooler. D.O.T. Cure W.W. is a membrane forming wax based material that seals the necessary moisture for proper cement hydration. D.O.T. Cure W.W. is formulated to comply with V.O.C. content limits, as required by Air Pollution Control Regualtions.

Specially designed for use on exterior commercial projects, such as highways, residential paving, airport runways, concrete lined canals, dams parking lots, engineering projects and as specified.

ASTM C-309, Type I, Class A and B and AASHTO M-148, Type I and/or I-D.


D.O.T. Resin Cure
D.O.T. Resin Cure is a water emulsified, all resin based liquid membrane forming curing compound for freshly poured concrete. D.O.T. Resin Cure forms a continuous membrane that controls curing for strong and durable concrete. D.O.T. Resin Cure is formulated to comply with V.O.C. content limits.

Applied to fresh concrete, D.O.T. Resin Cure forms a vapor sealing membrane which retains more than 95% of the ractive moisture for three or more days.

ASTM C-309, Type I, Class A and B and AASHTO M-148, Type I and/or I-D.
Catalog page:073

Product:CONSPEC FORM RELEAVE AGENTS
SubCategory: Form Release/Curing Compounds
Manufacturer:Conspec Marketing & Manufacturing Co.
Description:React S
A positive barrier form release agent especially formulated to meet the demanding requirements of architectural forming in any climatic environment. Provides maximum performance on the widest range of forming materials including fiberglass, steel, aluminum, plastic, coated paper and all type of wood forms. will not stain even white concrete and has no deleterious effect upon the natural bonding characteristics of secondary toppings or coatings, caulks, or sealants.

Corps of Engineers Specification CE 204, Section 3-03K.


Aluminum Release
A chemically active concrete form release agent that is especially formulated for use on seasoned aluminum forms. Aluminum Release is also an ideal product for all areas of concrete forming when stripping problems are anticipated. Creates a positive, chemically active barrier to which concrete cannot adhere. Aluminum forms stip easily and cleanly allowing maximum production.


Form Free
Form Free is a barrier form release agent with a neutral pH. it is neither acidic or alkaline in nature. Form Free does not depend upon a reaction with concrete to provide clean and easy form releases. Provides architectural surfaces and maximum performance on a wide range of formingmaterials, including fiberglass, steel, plastic, coated paper and wood forms.

Corps of Engineers Specification CE 204, Section 3-03K


Enviroform
A chemically reactive concrete form release agent blended from natural "environmentally friendly" raw materials. Formulated to release hardened concrete from a wide range of forming material. Environmentally compliant for use in both indoor and outdoor applications. Contains no diesel fuel, common lubricating oils, waxes, or kerosene. Enviroform is 100% biodegradable.

Provides maximum performance on the widest range of forming materials, including fiberglass, steel, aluminum, plastic, coated paper and all types of wood forms. ideal for precast plants and other inteiror concrete forming applications and job site oiling where run off may be a concern.

Corps of Engineers Specification CE 204, Section 3-03K
Catalog page:073