You Searched For:
  • SubCategory=Light Form Anchor
12 Matches Found (displaying 1 to 12)

Product:PENCIL ROD
Category:Concrete Accessories
SubCategory: Light Form Anchors
Manufacturer:Dayton/Richmond
Description:Pencil Rod is .225" and .375" mild steel smooth rod used in conjunction with Rod Clamps or Form Clamps for various form tying applications. Pencil Rod is available in full coils or straightened and cut to length.
Catalog page:014

Product:SBR SNAP-TY
Category:Concrete Accessories
SubCategory: Light Form Anchors
Manufacturer:Dayton/Richmond
Description:The SBR Snap-Ty is equipped with 15/16" flat washers and is manufactured for specified wall thickness. SBR Snap-Ty provides a 1/2" or 1" breakback from the concrete surface.
Catalog page:014

Product:SC METAL CONE SNAP-TY
Category:Concrete Accessories
SubCategory: Light Form Anchors
Manufacturer:Dayton/Richmond
Description:The SC Metal Cone Snap-Ty is available with a 1/4" or 1/2" break metal cone spreader washer to provide a cone recess breakback. Manufactured for specified wall thickness. Tie wire is crimped to prevent turning in the concrete and provides increased bond for a more positive breakback.
Catalog page:014

Product:SPC PLASTIC CONE SNAP-TY
Category:Concrete Accessories
SubCategory: Light Form Anchors
Manufacturer:Dayton/Richmond
Description:The SPC Plastic Cone Snap-Ty is equipped with a cone spreader
which provides for a 1" or 1-1/2" setback and is manufactured for
specified wall thickness. The cone
protects the breakback section.
Catalog page:014

Product:SPEED-TY
Category:Concrete Accessories
SubCategory: Light Form Anchors
Manufacturer:Dayton/Richmond
Description:The Speedy-Ty is a short end loop-ty fitted with high impact, self-centering one inch breakback plastic cones. Speedy-Ty is used in conjunction with the Speedy Bracket for loose plywood forming.
Catalog page:014

Product:WATER-RESISTANT SNAP-TY
Category:Concrete Accessories
SubCategory: Light Form Anchors
Manufacturer:Dayton/Richmond
Description:The water-resistant feature is available on any type of Snap-Ty. It includes a swaged metal or a neoprene washer in the center of the tie to break surface continuity and minimize water seepage. Minimum wall thickness is 7".
Catalog page:014

Product:FORM CLAMP
Category:Concrete Accessories
SubCategory: Light Form Anchors
Manufacturer:Dayton/Richmond
Description:The Form Clamp is available in two sizes to handle all rod diameters from 1/4" to 5/8". This strond and versatile clamp can be used in all types of forming requirements, is especially effective in battered or curved wall applications.
Catalog page:015

Product:RICHCO WALER BRACKET
Category:Concrete Accessories
SubCategory: Light Form Anchors
Manufacturer:Dayton/Richmond
Description:The Richco Waler Bracket is a simple cadmium plated bracket designed to fit any standard Richmond short-end Snap-Ty. Used with horizontal walers or vertical studs, the bracket eliminates most nailing.
Catalog page:015

Product:SINGLE WALER BRACKET
Category:Concrete Accessories
SubCategory: Light Form Anchors
Manufacturer:Dayton/Richmond
Description:The Single Waler Bracket is designed to be used with any standard Richmond short-end Snap-Ty. This durable bracket can be used with horizontal walers or vertical studs.
Catalog page:015

Product:SPEEDY BRACKET
Category:Concrete Accessories
SubCategory: Light Form Anchors
Manufacturer:Dayton/Richmond
Description:The Speedy Bracket is a simple one-piece unit designed to accept the Speedy-Ty. It will accommodate single or double 2x4's, single 3x4, or a single 4x4; horizontally or vertically. Bracket is tempered for strength and can be used as a breakback tool.
Catalog page:015

Product:STEEL STAKE
Category:Concrete Accessories
SubCategory: Light Form Anchors
Manufacturer:Dayton/Richmond
Description:Steel Stakes are rugged, reusable steel stakes available in 18", 24", 30" and 36" lengths. Spirally arranged nail holes assure easy positioning and secure nailing. Standard unit is 3/4" diameter. 7/8" diameter and other lengths available on special order.
Catalog page:015

Product:TYHOLDER
Category:Concrete Accessories
SubCategory: Light Form Anchors
Manufacturer:Dayton/Richmond
Description:The Tyholder is used with any standard Snap-Ty to provide a quick and easy wedging action to securely hold the tie and formwork in place.
Catalog page:015