You Searched For:
  • SubCategory=Masonry Accessories
5 Matches Found (displaying 1 to 5)

Product:# 359 & # 359-C –Weld-On Ties
Category:Masonry Accessories
SubCategory: Masonry Accessories
Manufacturer:Hohmann & Barnard, Inc.
Description:· Mill Hgalv.,Hot Dip Galv.,/Stainless Steel

· #359- 14” diameter x 9” long

· #359-C is a continuous 8 foot length with offsets 16” o.c.

Use in conjunction with Vee Wall Tie #VWT (Pg.14) or Column Web Tie #301W (Pg. 13) The systems anchor masonry to the structural frame allowing differential movement without any transfer of stresses.
Catalog page:091

Product:# Mortar Net
Category:Masonry Accessories
SubCategory: Masonry Accessories
Manufacturer:Hohmann & Barnard, Inc.
Description:The Mortar Net is manufactured of high density Polyethylene (HDPE) or nylon strands woven into a 90% open mesh. It will not react with common building products, including PVC, Polystyrenes, copper, rubberized asphalt, lead, stainless steel or galvanized metal. It will not degrade as a result of temperature variations and is designed to last for the life of the building.

· Catches and permanently suspends mortar droppings in masonry cavity walls above the level of the flashing and weeps so blockage of weep hole vents can’t occur. Weep holes stay open.

· Unique patented dovetail shape breaks up mortar droppings, prevents mortar damming, so water always has open flow paths to weeps.

· 90% open plastic mesh construction allows unobstructed passage of air & water through the material itself so walls breathe, drain & dry quicker

· Specifically designed to work in conjunction with standard flashing/weep hole drainage systems in masonry cavity walls

· Simply stands in collar joints or cavity, requires no fasteners or adhesives, no special skills or tools, so installation by masons is fast & easy.

· Lightweight for inexpensive and easy shipping storage, handling and installation,even on ligh scaffolding.

· Slightly compressible to allow for cavity variations in the field.

· Eliminates the need for any other system to deal with mortar droppings such as cotton wicks, pea gravel, or batter boards.

· Eliminates inexact design language such as “weep holes shall remain open,”
Sol designer takes control of and responsibility for the wall’s success.
Catalog page:091

Product:#359F Series - Anchor Straps
Category:Masonry Accessories
SubCategory: Masonry Accessories
Manufacturer:Hohmann & Barnard, Inc.
Description:· #359F - Mil Galv/Hot Dip Galv./Stainless Steel –3/4” wide x 12 ga. Thick x 7” long, giving 4 inches of vertical adjustability State preference when ordering.

· #359FH – same availability as above, but with Ό” holes as shown

· #359F-C-Same availability as #359F, but comes in continuous lengths of 8’ or 10’ (offsets are 16” O.C.)

· #359FH-C-same as #359F-C, bit with Ό” holes as shown -#359F and #359F-C are for attachment to steel -#359FS and #359FH-C are for attachment to metal stud, concrete, or masonry

Use in conjunction with Vee Wall Tie #VWT (Pg. 14) or Column Web Tie #302W (Pg.13) The system anchors masonry to the structural frame allowing differential movement without any transfer of stresses.
Catalog page:091

Product:#359FP & # 359FP-C Weld-On Ties
Category:Masonry Accessories
SubCategory: Masonry Accessories
Manufacturer:Hohmann & Barnard, Inc.
Description:· Plain/Hot Dip Galv./Stainless Steel
· #359FP - 3/8" dia X 9" long
· #359FP-C is a continuous 8 ft. length 3/8" dia. with offsets 16" o.c.
· Backplates (supplied loose) restrain compressive loads.

For use when there is a requirement for spray-on fireproofing. Exaggerated offset dimension 'L' (specify when ordering) allows for projection beyond fireproofing for visibility and accessibility to the mason.
Catalog page:091

Product:#MGS – Mortar/Grout Screen
Category:Masonry Accessories
SubCategory: Masonry Accessories
Manufacturer:Hohmann & Barnard, Inc.
Description:· Isolates flow of grout in designated areas requiring reinforced concrete block

· Allows for greater bonding of masonry anchor in hollow block construction

· Ό” square monofilament screen is fabricated from high strength, non-corrosive polypropylene polymers.

· Micro-thin material has high tensile and burst strength, yet will not interfere with mortar bond.

· Standard widths 4”, 6” & 10” x 100 ft. roll
Catalog page:091