You Searched For:
1 Matches Found (displaying 1 to 1)
- SubCategory=Masonry Ties Anchors
|Product:||POSITIE BRICK VENEER ANCHORING SYSTEMS|
|SubCategory:|| Masonry Ties and Anchors|
|Manufacturer:||Heckmann Building Products, Inc.|
|Description:||IMPORTANT! PLEASE NOTE:|
PSO-I-TIE ADVANTAGES OVER OTHER SYSTEMS
1.) Uses consistent screw. Screw is provided as a part of the POS-I-TIE System- No interior screws can be substituted.
2.) Provides positive connections. Screw actually penetrates gypsum board making Positive Lateral Connection for transfer of compression and tension loads to structural backup.
3.) Enables speedy cost-saving installation. Only one screw needs to be placed, not two.
4.) Corrosion Resistant. POS-I-TIE seals the hole it makes when it seats itself in the backup. Barrel section is made of ZAMAC 2, A 92% zinc alloy. Screws are zinc elecytro plated. Then they are coated twice and baked with STALGARD. STALGARD exceeds Electro Galvanizing specifications.
5.) Differential Movement. Slotted Barrel allows for movement due to temperature variations. Tie design provides for allowable ACI 530 code vertical adjustment.
For Additional Information see BRICK INSTITUTE TECHNICAL NOTE 288 REV11 February 1987.
TEST DATA AVAILABLE UPON REQUEST.
DRILL-IT AND STALGARD ARE REGISTERED TRADEMARKS OF ELCO INDUSTRIES INC.
TAPCON AND CON-DRIVE ARE REGISTERED TRADEMARKS OF ILLINOIS TOOL WORKS INC.
POS-I-TIE IS A REGISTERED TRADEMARK OF DL ENTERPRISES.
Click image for more specifications.
| || |