You Searched For:
  • SubCategory=Moisture Vapor Barrier
1 Matches Found (displaying 1 to 1)

Product:FIRSTLINE CORPORATION MOISTRUE VAPOR BARRIER
Category:Vapor Barriers/Tarps/Geotextiles
SubCategory: Moisture Vapor Barrier
Manufacturer:Firstline Corp.
Description:PLY-BAR PLUS 11
LAMINATED UNDERSLAB MOISTURE-VAPOR BARRIER


1. PRODUCT NAME

Ply-Bar Plus 11 Laminated Under-Slab Moisture-Vapor Barrier

2. MANUFACTURER

Firstline Corporation
Zazlea City Industrial Park
Valdosta, GA 31603-5225
Tel (912) 247-1717
Fax (912) 244-4135
800-POLYMAX (800-765-9629)

3. PRODUCT DESCRIPTION

Basic Use: Ply-Bar Plus 11 is designed for use as a high performance moisture-vapor barrier under poured concrete foundation slabs, on or below grade, to prevent moisture migration through the slab under conditions which would requires vapor-barrier more resistant to abrasion puncture than standard 6 mil polyethylene sheeting.

Composition & Materials:
Ply-Bar Plus 11-A multi-composite of a 1.5 mil biaxial oriented high density polyethylene film facing; a heavily reinforced grid pattern of biaxially oriented polyester fiber yarn, extrusion laminated to a PE coated heavy duty kraft face sheet.

Sizes and Basis Weight:
Ply-Bar Plus 11 is available in non-seamed roll widths of 8, 12 and 16, in roll lengths of 125 or 250 per roll. Ply-Bar Plus 11 has a basis weight of 50 lbs. per 1000 sq. ft.

Applicable Standards:
Ply-Bar Plus 11 exceeds the requirements of VA and FHA minimum property code standards and complies with specification UU-B-790A for Type 1, Grade A, Style 4 building paper.

4. TECHNICAL DATA
Ply-Bar Plus 11 is tested in accordance with ASTM Procedures. The values shown in Table 1 are averages obtained from this testing.

Fire Rating: Ply Bar Plus 11 is not rated as a flame retardant building paper.

5. INSTALLATION
The base area should be properly leveled and firmly tamped. Apply Ply-Bar Plus 11 over the base area surface with the roll width parallel to the direction of the concrete pour. Lap all sides and head joints a minimum of 6 inches and seal securely with Firstline black 2 #620 High Tack fabric tape or alternate quality pressure sensitive tape.

6. AVAILABILITY AND COST

Availability: Ply-Bar Plus 11 is available through contractors and building supply wholesale distributors throughout the United States and Canada. Write or call for the name and location of the source nearest your area.

Cost: For current cost information of Ply-Bar Plus11 contact your local building supply wholesaler/dealer or call Firstline toll-free at 800-POLYMAX (800-765-9629)

7. WARRANTY

Firstline Corporation warrants that Ply-Bar Plus 11 meets or exceeds the specifications listed in the above and are tested to insure compliance with the physical properties listed under Item 4. Firstline Corporation is not responsible for any damage which may be caused by improper or inappropriate use or handling of their products during or after installation.

8. MAINTENANCE
None required.

9. TECHNICAL SERVICES

Technical advice and additional information may be obtained by writing or a call to Firstline as noted under Item 10

10. FILING SYSTEMS

Please refer to the Firstline Building Products Catalogue for specific product or technical information. For price, availability or delivery information, write or call:
Catalog page:152