You Searched For:
  • SubCategory=Polyester Resin Anchoring System
1 Matches Found (displaying 1 to 1)

Product:KELKEN POLYESTER RESIN ANCHORING SYSTEM
Category:Tools & Supplies
SubCategory: Polyester Resin Anchoring System
Manufacturer:Kelken Construction Systems
Description:Keligrount 101

Horizontal application or angled up
Easy-to-use large capacity cartridges

·Cartridges are much larger than competitor's decreasing labor cost of frequent changes.
·Easier to pump than more viscous epoxy cartridges.
·Can be used at sub-freezing temperatures or in rainy weather.
·May be used under water.
·Clings to the indside of the drilled hole until the anchor is inserted. Not toppers required.
·Every lot guaranteed and certified to break A325 strength anchors at shallow embedment.

Keligrout

Vertical application or angled down

Easiest mix and pour chemical anchorage material in the world

·The certainty of mixed "powder" catalyst, easily stirred into resin for setup in minutes.
·Can be used at sub-freezing temperatures or in rainy weather.
·May be used under water.
·Pours from the can into large numbers of drilled holes in seconds.
·Every lot guaranteed and certified to break A325 strength anchors at shallow embedment.

The same formular - only the hardener consistency differs - for the same incredible anchor-breaking strength.

Keligrout
Product Description and Technical Data

Product Description
Keligrout is a superior high strength polyester resin anchoring material with guaranteed pullout values exceeding ACI 318 requirements in very shallow drilled holes.

Product Features
·easy mixing by hand
·no special equipment required for mixing or pouring Keligrout
·assured curing
·hardening powder provided will cause exothemic get (set) in 20 min at 70 degrees farenheit.
·may be used in freezing conditions down to 10 degrees farenheit by keeping resin warm (70 degrees to 90 degress) immediately prior to use.

Packaging
30 fluid oz. in quart containers
16 fluid oz. in quart containers
7 fluid oz. in pint containers
4 fluid oz. in 1/2 pint container
All Keligrout is shipped with properly proportioned hardening powder in a plastic jar. During cold months Kelken provides two jars per container.

Uses
·anchoring Kelibondanchors dowels, rebars, rock anchors and mine roof bolts to concrete or rock.

Guarantee

Keligrout strengths are guaranteed and certified. Every lot of Keligrout is performance tested by tension loading (to ASTM E488 Standards). A 5/8" diameter, A325 strength for greater) Kelibondanchor is embedded 6 inches in a 3/4 - diameter air drilled hole. If we do not exceed apullout of 26,000 (1.25 yield) Kelken will not ship the lot of Keligrout.
Catalog page:201