You Searched For:
1 Matches Found (displaying 1 to 1)
- SubCategory=Vinyl Sheeting
|Product:||TECH-DATA VINYL SHEETING|
|SubCategory:|| Vinyl Sheeting|
A.P.S. Vinyl Sheeting is a non-reinforced, homogeneous, waterproof, impermeable, flexible poly vinyl chloride sheeting that has been laboratory compounded, and has been reduced to a thermoplastic state and calendered into a continuous sheet approximately, 002 thick. The sheeting cannot be physically deformed when stretched at room temperature and has been so compounded so as to resist exposure to the elements without any physical deterioration when subjected to weatherometer testing in accordance to the ASTM Standards D822 for a period of no less than 400 hours.
Ridge and Valley Flashing
Storm Gutter Liner (Metal and Wood) Stone, Brick or Wooden Steps (Outside)
Pipe Wrap (Protective Wrap)
Bridges and Highways
Water and Air Gaskets
Window Glazing Strips (Replacement for Rubber)
Vapor Barrier- Cement Slabs, Wooden Floors
Basement Walls and Floors
Slab on Grade Waterproofing
Pipe Wrap- Protective Wrap for Pipes and Conduits, Resists Underground Corrosion
Underground Construction Bomb She
Tunnels All Types
Water and Air Gaskets
CONCEALED IN- MASONRY, WOOD FRAME, ROOFING
Window Heads, Sills and Doors
Foundation at Grade
Curtain Wall (Peripheral Gutter)
Shower Pans Residential/Industrial
Dampproof Floor under Linoleum
Roof Flashing s base for slate, shingles, tiles, etc.
Thresholds, Sills and Patios
Sheathing (Frame, Clapboard, brick veneer structures)
ADVANTAGES OF A.P.S. VINYL SHEETING
1.) Has high mechanical strength, and has tear and puncture resistance.
2.) Retains flexibility at temperatures as low as 20 degrees F.
3.) Will not be affected by extreme changes in temperature and is mildew resistant.
4.) Will not rot as materials that contain paper or organic fibers do.
5.) Resistant to acids, alkalies and fungi, which can be encountered in construction work.
6.) Will not stain or bleed, nor is subject to corrosion, or electrochemical action, since there is no metal component.
ASTM D412-61 T Tensile Strength 2200 PSI Elongation 250+%
Tear Resistance 250 lbs. per square inch Puncture Resistance 200 lbs. +
STANDARD STOCKING SIZES
.020 x 60 x 150
.020 x 54 x 150
.020 x 48 x 150
.020 x 36 x 150
.020 x 28 x 150
.020 x 24 x 150
.020 x 20 x 150
.020 x 18 x 150
.020 x 16 x 150
.020 x 12 x 150
.020 x 9 x 150
Other gauges and widths manufactured to order.
We will replace any material which proves defective in workmanship within 90 days from date of purchase. Because we cannot anticipate or control the many different conditions under which this information and our products may be used, we do not guarantee the applicability or the accuracy of this information or the suitability of our products in any given situation. Users of our products should make their own tests to determine the suitability of each such product for their particular uses. The products discussed are sold without warranty, either express or implied, and buyer assumed all responsibility for loss or damage arising from the handling and use of our product.
Also, statements concerning the possible use of our products are not intended as recommendations to use our products in the infringements of any patent.
| || |